The Best Box Mods Under $100
Being the best doesn’t always have to come with a high price tag. In fact, there are many durable and well performing box mods in the vaping market that are priced exceptionally well for the performance, features and functions that you receive. We don’t want to keep these great deals from you, so today, we’re going to list the best box mods under $100, as well as sharing a bit of information about them.
1.) VaporShark DNA 30
The VaporShark Series of devices have become viewed as the more luxurious side of vaping, since all the devices in the series are built with a higher cost and durable cast zinc-aluminum alloy metal material. In addition, VaporShark devices are also built in the United States, making them a hot commodity. However, there’s a gem within that series of devices that is respectively priced lower because of its smaller size. How this works in the customers favor is that small box mods happen to be the hot topic within the vaping 
marketplace, and we here at Vapor Authority have lowered that price even more, giving it the ability to squeeze right into this list of best box mods under $100.
As mentioned, the VaporShark DNA 30 is made of a cast zinc-aluminum alloy metal material and has been precisely machined to excellence throughout the device. Located at the top of the device rests a 510 connection that has a spring-loaded center pin. Moving towards the side of the VaporShark DNA 30, is large fire button, then just below sit the wattage up and down buttons. On the bottom of the device is the uniquely placed OLED screen where you’re able to monitor voltage, wattage, resistance and battery life.
If performance is what you crave from this “rich man’s box mod”, then you’ll certainly get it, as the VaporShark houses an Authentic Evolv DNA 30 Chip. Moreover, if you’re being offered high power, you would expect to be offered low resistance, and so the DNA 30 reads resistance levels as low as 0.5 ohm’s, which will fire any attachment currently available on the market.
What makes the VaporShark DNA 30 even better is that it’s very compact, weighing only 5g, and is only a mere 2.9” tall and only 1.4” wide. Indeed, the DNA 30 is a small device, but it packs a hefty punch and sports an impressive 1300mAh internally charged battery.
Price: $99.99
To purchase or for further information, go HERE
2.) Innokin iTaste MVP 3.0
The Innokin iTaste MVP Series of devices became the introductory device to small regulated mods that pack outstanding performance and a very lengthy battery life. In addition, the MVP also was an industry first to include an output port designated to charging mobile devices. The first version of the MVP offered up to 5 volts and packed a 2600mAh internally charged battery. The second version of the MVP offered minor improvements, continuing with its same power and battery life. The next version of the MVP was an even more cost 
friendly version, still offering 2600mAh from its battery, while introducing a higher wattage of up to 20 watts. And, that brings us to the latest version of the Innokin iTaste MVP Series, the Innokin iTaste MVP 3.0.
In addition to being designed from the highest quality of materials, the MVP 3.0 presents itself well with its very appealing perforated backing. Moreover, the MVP is equipped with a large OLED screen that gives the ability to monitor settings on the device. Located on the top of the device is a small LED to indicate battery life. However, looks isn’t the only thing this device has going for it… it also can produce up to 30 watts of power and reads resistance levels down to 0.4 ohm’s, giving the ability to fire any coil currently on the market.
The MVP 3.0 also comes equipped with a slew of safety features and remarkable functions that make using the device a pleasure to use. What sets the iTaste apart from the rest is its ability to charge your mobile devices, using its quite large 3800mAh internally charged battery.
Price: $59.99
To purchase or for further information, go HERE
3.) Eleaf iStick 50W
The Eleaf iStick Series of devices were designed to target those who want a small device, modern performance, but didn’t want to pay the high price mods typically cost. For this reason, Eleaf manufacturers some of the most cost-friendly mods currently on the market. The series of devices have gained a large following because so. Starting from its smallest, Eleaf manufactured the iStick Mini, which can reach up to 10 watts of power, reads down to 1.0 ohm’s, and is equipped with a 1050mAh internally charged battery. The 
iStick 20W, as you would expect, can produce up to 20 watts of power, reads down to 1 ohm, and is equipped with a 2200mAh internally charged battery. While the iStick 30W can produce up to 30 watts of power, reads down to 0.4 ohm’s, and comes equipped with a 2200mAh internally charged battery. That leads us to Eleaf’s latest iStick version.
The Eleaf iStick 50W is a whole new beast in itself, as it allows up to 50 watts of power and can read resistance levels as low as 0.2 ohm’s, which is plenty enough for any coil currently on the market. However, to support its large power, the iStick 50W comes in packing a gigantic 4400mAh internally charged battery. Don’t let the large battery capacity fool you, this device still only sits 3.26” in height and is only 1.77” wide.
Though the iStick 50W is one of the lowest priced box mods with this amount of power currently on the market, it still has all the bells and whistles that of a higher priced device. Expect safety features to be jam packed in this small powerhouse, as well as an OLED display screen, a spring-loaded center pin, and functions that give you passthrough capabilities, amongst others.
Price: $49.99
To purchase or for further information, go HERE
