Genuine Smoktech™ U-DCT v2 Mini Tank

By Smoktech

3 reviews

$12.95 $2.99

Sale Smoktech U-DCT V2 Mini Tank
  • Smoktech U-DCT V2 Mini Tank
  • Smoktech U DCT
  • SMOKtech DC Tank Mini
Reviews for Genuine Smoktech™ U-DCT v2 Mini Tank
3.3 out of 5, based on 3 reviews
Jay S from Cali on Mar 03, 2014
Well built, like the locking ring to hold cartomizer in place, doesnt work at all on my SID MOD regardless of voltage setting, barely works on my EGO C. Waited hours after following directions for liquid to completely soak into very bottom of polyfill and still hardly any vapor at all.
Damian from Little Rock, AR on Aug 29, 2013
This hits exceptionally well and lasts me all day, but filling it is a bit tricky. If filling was easier, I would give it a 5 . . .
Rodney Grisoni from Hartford on Aug 06, 2013
if you are a fan of cartomizer, like the kanger cartomizers, then you'll be very pleased with this. Basically it hits as good as a great cartomizer but then doesn't need to be constantly refilled. It's like the best pf both worlds.
SMOKtech U-DCT V2 Mini Tank


Vapor Authority is proud to introduce the all new SMOKtech Ultimate Dual Coil Tank also known as U-DCT.  The U-DCT is the successor to the original SMOKtech DCT tank.  One of the most substantial improvements to the U-DCT is a locking cap/ring at the base that will secure your dual coal tank cartomizer, thereby virtually eliminating the possibility of a leak. The cartomizer itself is flanged, and has additional slots on the opposite side, allowing it to “click” tightly into place. 

The SMOKtech U-DCT V2 provides a wonderful, rich vapor, with massive vapor cloud production while simultaneously bringing out the flavors of your e-liquid.  This is a must have for any vaper!



Tank Material:  Polypropylene 

Coil Type:  Dual Coil Cartomizer Tank

Cartomizer: 1.5ohm or 2.5ohm  SMOKtech XL Dual Coil Cartomizer

Resistance: 1.5 ohm

Thread: 510

Liquid Capacity: 3ml

Length: 1.8 inches

Diameter: .55 inches


Package Includes:

1 x 3.5ml U-DCT tank with locking ring and groove at the base to prevent your carto from spinning about.

1 x SMOKtech 510 XL DCT 1.5 ohm Dual Coil Cartomizer (45mm from base to top)

1 x Clear 510 drip tip (you can use your own drip tip)

1 x Locking bottom cap/ring to secure cartomizer from sliding out accidentally.


Filling Instructions:

1) Remove Drip Tip

2) Fill the stainless cartomizer: Put 4-5 drops of e-liquid onto the white spongey polyfill at a time.  Let the liquid soak into the polyfill before adding more liquid. (Avoid dropping e-liquid into the hole in the center.  Once polyfill is soaked, move onto next step.

3) Unscrew bottom ring at base and pull cartomizer about a 1/4-1/2 inch out of the tank (just enough so you can drip liquid into surrounding tank).

4) Fill tube at a 45 degree angle carefully so as not to get liquid in the cartomizer, but rather filling up the tank surrounding it.

5) Push cartomizer back into tube making sure the grooves of the base line up

6) Screw back on the bottom ring

7) Reinsert Drip Tip

8) Without activating battery, inhale deep from drip tip.  This will force liquid from the tube into cartomizer and prevent dry/burnt taste.


For best results wait a couple of minutes for the E-Liquid to soak in before vaping.