Genuine Joyetech™ CUBIS PRO Sub Ohm Tank

By Joyetech

1 review

$24.99 $19.95

Sale Joyetech Cubis Pro sub ohm tank - 4ml
  • Joyetech Cubis Pro sub ohm tank - 4ml
  • CUBIS PRO tank by Joyetech
  • joyetech CUBIS pro tank
Reviews for Genuine Joyetech™ CUBIS PRO Sub Ohm Tank
5 out of 5, based on 1 reviews
from Fresno, CA on
I have four of the Cubis tanks and my wife wanted one, so I ordered two more and took 2 Cubis Pro as substitutes on the Cubis, which were out of stock. I love the Cubis, coming off Nautilus and Nautilus Minis we've been using for a couple of years now.

I thought the Cubis was a step up from the Nautilus and the Cubis Pro is an improvement on the Cubis. The main improvements are the different coils available for the Cubis or Cubis Pro. .25 Ohm SS, .5 Ohm SS, 1.0 ohm kanthal and a 1.5 ohm kanthal Clapton. I'm currently using a TC mod, but in power mode only so far. On the Pro, the most used coil has been the 1.0 Ohm, noting that I am a MTL vaper and use 6mg, 50/50 liquids. I have a few that are 30/70, so I thought I'd try the Clapton and with the airflow wide open, I get a very smooth experience with plenty of vapor. On 50/50 liquids, I get plenty of flavor with not as much vapor. I don't sub-ohm much, due to throat hit. The Cubis Pro is a top-fill tank and holds 4 ml of juice. It comes with 4 coils, including the "quick change" and LVC coil. The LVC is a juice flow control coil that can have the organic cotton replaced from a sheet that comes with the tank. It comes with two drip tips--one wide bore for DTL and a smaller bore for MTL.
So far, I'm loving the tank. Plus, for the fashionistas out there, it comes in several colors.
All in all, a very good upgrade from the Nautilus, and NO LEAKING! Thanks Vapor Authority!

Joyetech™ CUBIS PRO Sub Ohm Tank

Right when you think Joyetech could not possible make the Cubis tank any better, they release the latest update to this legendary clearomizer. The incredible Cubis Pro Tank delivers genuinely impressive vapor cloud production, along with intense and robust flavor that rivals that which is produced by high-end rebuildable atomizers. Designed to function with Joyetech’s vast selection of cutting-edge atomizer coils, the Cubis Pro Tank provides for a truly pleasurable vaping experience from start to finish.

As with the original Cubis, the Joyetech Cubis Pro Tank is constructed with the highest quality materials. The 304-grade stainless steel body is strong, resilient, exceptionally durable, and highly resistant to rust and corrosion. The body is then covered with two coats of durable paint, thereby further protecting it from the elements. The top of the Cubis Pro Tank sports a premium drip tip, which is dual-coated to match the finish of the body, providing for an exquisite and seamless look. The tank’s ornate details and sumptuous intricacies are representative of Joyetech’s mastery in the designing and engineering of their extremely well-performing products.

The Joyetech Cubis Pro Tank’s hefty 4ml Pyrex glass e-liquid reservoir not only supplements its overall stylish and chic aesthetic appeal, but also provides other advantages as well. Due to the acidity found in all e-liquids, when the tank is made with plastic, it is vulnerable to unattractive tarnishing as the plastic is eroded by the acidic environment. More importantly, however, the eroding plastic is prone to seeping into the e-juice, which is likely to alter the flavor as well. The Joyetech Cubis Pro’s glass tank, on the other hand, is entirely resistant to e-liquid’s acidity, which, in turn, provides for a longer lasting tank as well as markedly purer, cleaner, and truer flavor.

As beautiful and alluring as the Cubis Pro Tank is, Joyetech also paid careful attention on ensuring unparalleled convenience and performance as well. Their aim was to design a tank that can deliver competition-level performance, while simultaneously being extremely hassle-free. In line with this quest, Joyetech concentrated on tackling some of the most widespread difficulties associated with vaping tanks in general. One of the principal focal points was user-friendliness—particularly with regards to tank refills. As opposed to the preponderance of tanks, which necessitate being detached from the battery and removing the base each time adding e-juice is needed, Joyetech brilliantly designed the Cubis Pro with an advanced top-fill e-juice system. By simply disconnecting the Cubis Pro’s top cap, you can rapidly and effortlessly refill the tank without being forced to disconnect it from the battery whatsoever. This innovative design is also beneficial in that it helps eradicate leaking, which often occurs when the tank’s body and base are separated.

Further adding to the Joyetech Cubis Pro’s convenient and problem-free arrangement is its completely leak-proof design. Unlike the vast majority of tanks, which position the airflow control valve at the bottom of the device, Joyetech brilliantly placed the Cubis Pro’s airflow valve at the top, resting just below the mouthpiece. This, in turn, permitted Joyetech to configure the tank’s e-juice reservoir in a solid cup-shape design, which effectively eliminates the risk of leaking.

In addition, the Joyetech Cubis Pro Tank’s state-of-the-art airflow control valve’s positioning supplies two bonus functions as well. Similar to all airflow control valves, the Cubis Pro’s will enable you to adjust and modify the volume of air that is drawn into the tank while in use. In doing so, you can easily regulate the airiness of your hit. You can tighten your drag by restricting airflow, or enjoy airier hits by increasing airflow. Moreover, the top placement of the Cubis Pro’s remarkable airflow valve additionally permits you to tweak the temperature of the vapor produced too. You can decrease airflow for warmer hits, or increase it for cooler vapor. This available degree of customizability lends itself to an unparalleled vaping experience that is capable of pleasing vapers with all degrees of likes, preferences, and requirements.

Inasmuch as the unsurpassed engineering and design of the Joyetech Cubis Pro provides for an incredibly gratifying vaping experience, this degree of performance would be impossible without the genuinely exceptional atomizer heads that Joyetech fabricated to function with it. The Cubis Pro can operate with a large selection of atomizer coils, including Joyetech’s groundbreaking NotchCoils. Every one of the available atomizer coils is engineered to deliver a particular type of hit. This immense versatility in one of the reasons that the Cubis Pro is capable of satisfying both direct-to-lung vapers and mouth-to-lung vapers alike.

The Joyetech Cubis Pro’s gorgeous design, its competition level performance, and its unsurpassed versatility makes it the perfect tank for vapers of all types. If you are looking to purchase a new tank or researching for your very first, the Joyetech Cubis Pro should certainly be at the top of your list.


To Purchase Joyetech Cubis BF SS316L Stainless Steel Coils, Click HERE

To Purchase Joyetech Cubis Clapton Atomizer Coils, Click HERE

To Purchase Joyetech Cubis Stainless Steel NotchCoils, Click HERE

To Purchase Joyetech Cubis BF RBA Head, Click HERE


Joyetech Cubis Pro Tank Features:

Leak-Proof Design

Top-Positioned Airflow Control Valve

Made with Only Premium Material

Large 4ml E-Juice Capacity

Perfect for Direct-to-Lung and Mouth-to-Lung Vapers Alike

Top-Fill E-Juice System

Exceptionally User-Friendly and Convenient Design

Engineered to Operate with Many Atomizer Coils

Stunning Aesthetic Appearance

Entire Tank can be Completely Disassembled for Easy Cleaning

Durable, Solid, and Corrosion-Resistant

100% Authentic Joyetech


Joyetech Cubis Pro Tank Specifications:

Manufactured by: Joyetech

Body Material: 304 Stainless Steel

Tank Material: Pyrex Glass

E-Juice Capacity: 4ml

Threading: 510

Height: 2.14 Inches (54.5mm)

Diameter: 0.87 Inches (22mm)

Available Colors: Black, Stainless, Blue, Red, White


Joyetech Cubis Pro Tank Includes:

1 x Joyetech Cubis Pro Tank

1 x Joyetech Cubis NotchCoil (0.25 Ohms)

1 x Joyetech Cubis BF SS316L Stainless Steel Atomizer Coil (0.5 Ohms)

1 x Joyetech Cubis LVC Clapton Atomizer Coil (1.5 Ohms)

1 x Replacement Cubis Pro Drip Tip

2 x Replacement O-Rings

1 x Organic Cotton Pad