Genuine Kanger™ DRIPBOX 160 Starter Kit

By Kanger

2 reviews

$76.99 $59.99

Sale Kanger Dripbox 160
  • Kanger Dripbox 160
  • Kanger Dripbox 160 starter kit
  • Kanger Dripbox 160  kit
Reviews for Genuine Kanger™ DRIPBOX 160 Starter Kit
4.5 out of 5, based on 2 reviews
(5/5)
from Vacaville, Ca on
Kanger really made some good improvements to the original, I am really enjoying this setup. You can really chuck and get good flavor so easily with these RDA type pre-made coils. Never been easier, the squisher squoker dealy works well and keeps the wicks saturated with ease. It also comes with some adaptions for mouth to lungers, which work ok but this thing is definitely for the cloudchasers. You can though, use any other tank on it, just won't use the squonker. I put my TFV4 on it and it works great, lots of power. Nice in the hand for a bigger mod. Thanks guys!
(4/5)
from Pennsylvania on
I had the Dripbox and was pleased with it. It's marketed as a entry level dripper for someone new to dripping. It was my first squonker and I really liked it for work. I didn't have to constantly drip, just squeeze the bottle and it's good to go. The problems with it were lack of UI, no Variable Wattage and the battery box was just a screw on piece of crap. Also if you tightened the screw too much it would get stuck on just stay on eventually lighting it on fire. I went through squonker bottles every couple weeks too. it seemed once you got down to 1/2 a bottle you had to squeeze the hell out of it until the bottle broke.

The 160 has fixed all of these problems. The battery box is nice, no risk of starting a fire. The squonker bottles seem to work much better, almost too well if you were used to the previous model. It now has VW and TC although I have not touched the TC. I feel like TC isn't really needed for squonkers but that's just my opinion. It comes with 2 build decks, a nice new one with large hole for using the 2 sets of clapton coils provided to you and also one of the older disposables. I used the clapton coils for the first two days and I really didn't like them. Even with the provided splash guard it just kept flinging hot juice in my mouth. I'm really not a fan of that. In my opinion, use the new build deck and make a .40 coil out of .24 gauge kanthal, forget about the TC and it works great. nice mod for the money.

This is just a first impressions review since I've only had this for a few days. If it's durable and can go the distance like my sigelei 100 has only time will tell. The previous model dripbox only last 2 months before it just stopped working on me, luckily the day it died was the day the 160 showed up in the mail.

Genuine Kanger™ DRIPBOX 160 Starter Kit 

If there were one single word to describe Kangertech it would be “innovation.” Although known for manufacturing genuinely high-quality vaping hardware, Kanger has been at the forefront of vaping technology since the company was founded. In line with their pioneering spirit, they have now released the second version of their wildly popular and proprietary vaping system—the Kanger DripBox 160. This masterpiece retains all of the wonderful features of the original DripBox, but also includes enhancements, modifications, and an array of additions, making this device one of the most exciting released to the vaping public to date.

The Kanger DripBox 160 is an exceptionally powerful device, boasting an impressive 160W of maximum output power. This hefty output wattage works optimally with sub-ohm atomizer coils, providing for sensationally thick vapor clouds. With the included operation buttons, you can adjust the DripBox 160’s wattage based on the resistance of your atomizer coil as well as your personal preferences.

Adding to the versatility of the Kanger DripBox 160 is its temperature control, sensing, and limiting capacity. When coupled with an atomizer coil made with stainless steel, titanium, or nickel wire, this magnificent device allows you to regulate the temperature of the atomizer coil itself. In fact, the device allows you to set the temperature from 200°F - 600°F, thereby allowing you to fine-tune the temperature of the vapor that is produced.

The Kangertech DripBox 160 is furnished with a high-quality OLED screen that brings a myriad of useful information to your fingertips. By activating the screen, you can monitor the wattage setting, the temperature setting, the remaining battery life, the resistance of your atomizer coil, the voltage setting, the length of your hit, and any errors that may occur while the DripBox 160 is in use. With this much data readily available to you, setting and adjusting your device has never been easier.

Kangertech intelligently engineered the DripBox 160 to accommodate two external 18650 batteries (sold separately). Since all rechargeable batteries are incapable of holding a charge after a period of time, the ability to remove your batteries eliminates the need to replace the entire device once the batteries have reached the end of their lifespan. Moreover, by being permitted to swap batteries you can always carry fully charged spares with you in the event the ones in use die before you are able to recharge them.

Perhaps the most revolutionary feature of the Kangertech DripBox 160 is its unique pressure-powered e-liquid delivery system. As opposed to other rebuildable dripping atomizers that require you to consistently saturate the wicks by dripping e-juice on them, the DripBox 160 allows you to effortlessly soak your wicks with a simple squeeze of the liquid tank located on the side of the device. This ability brings you all of the benefits of an RDA without the hassle of constantly removing the cap, dripping e-juice, then replacing the cap.

Kanger brilliantly included two separate drip tips within the DripBox 160 Kit. One of the mouthpieces is designed for those who enjoy direct-to-lung hits, while the other is engineered to accommodate those who prefer mouth-to-lung hits. This is a phenomenal capability, as it is able to provide a satisfying vaping experience for vapers of all types.

The Kanger DripBox 160 is equipped with a state-of-the-art rebuildable atomizer (RBA) deck. Unlike the original DripBox, the new 160 version features a much larger deck and building space, allowing you to fabricate virtually any atomizer coil you can imagine. The large posts provide adequate space for Clapton coil builds as well. In fact, Kangertech has included a pre-made 0.2 ohms Kanthal coil complete with 100% pure Japanese organic cotton wicks.

In every way, shape, and form, the Kanger 160 is a dream come true for all builders and drippers. Extremely feature-rich, innovative, convenient, powerful, and easy-to-use, this groundbreaking vaping device is an absolute must-have.

Note: Batteries Sold Separately.

 

To Purchase a Battery for the iStick TC60W, Click HERE

To Purchase RBA Replacement Coils for the DripBox, Click HERE

 

Kanger DripBox 160 Features:

Made with Only Premium Materials

Variable Wattage

Powered by Two External 18650 Batteries (Sold Separately)

Revolutionary E-Juice Delivery System

Impressive 160W Maximum Power Output

Equipped with an Easy-to-Use RBA Deck

Furnished with One Pre-Made Atomizer Coil Build

Temperature Control, Sensing, and Limiting Capability

Massive 7ml E0Juice Capacity

Includes Mouth-to-Lung and Direct-to-Lung Drip Tips

Compatible with Kanger DripBox Atomizer Coils

Ohms Meter

Battery Level Indicator

 

Kanger DripBox 160 Specifications:

Manufactured by: Kangertech

Maximum Wattage Output: 160W

Temperature Range: 200°F - 600°F

Battery: Takes Two 18650 Batteries (Sold Separately) – (Both Must be Identical)

E-Juice Capacity: 7ml

Length: 3.31 Inches (84mm)

Width: 2.2 Inches (56mm)

Depth: 0.94 Inches (24mm)

 

Kanger DripBox 160 Includes:

1 x Kanger DripBox 160

1 x RBA Deck (with Pre-Made Coil)

1 x Mouth-to-Lung Drip Tip

1 x Direct-to-Lung Drip Tip