Table of Contents
- Introduction
- What is Pulse Mode in Vaping?
- Benefits of the Pulse Vaping Experience
- Top Devices Featuring Pulse Technology
- Technical Insights for Experienced Vapers
- Pairing the Right E-Liquid
- Battery Safety for Advanced Devices
- Maintaining Your Pulse-Enabled Device
- Why Choose Vapor Authority?
- Conclusion
- FAQ
Introduction
Vaping technology has evolved rapidly over the last decade, moving from simple batteries to highly sophisticated intelligent chipsets. One of the most discussed features in modern hardware is "Pulse Mode," a technology that has changed how enthusiasts experience flavor and vapor production. At Vapor Authority, we frequently receive questions about how these advanced firing modes work and whether they actually improve the daily experience for adult vapers. This technology aims to provide a more consistent hit by pulsing power to the coil at incredibly high speeds rather than delivering a single, flat wave of energy.
Warning: This content is intended for adults of legal vaping age only. Vaping products contain nicotine, which is an addictive chemical. These products are not intended for use by minors, non-smokers, pregnant or breastfeeding women, people with heart conditions, high blood pressure, or asthma. Consult a physician if you have concerns about whether vaping products are appropriate for you.
Quick Answer: Pulse Mode is a specialized chipset setting that fires the coil in rapid 0.02-second pulse intervals to maintain a steadier temperature. Unlike standard modes that deliver continuous power, this high-speed pulsing ensures that flavor and vapor production remain consistent throughout the entire hit.
Pulse technology represents a shift toward precision in the vaping industry. By understanding how your device manages power, you can better tailor your setup to your specific preferences. Whether you are using a compact pod system or a high-powered box mod, the "pulse" feature is designed to optimize every second of your inhale.
What is Pulse Mode in Vaping?
Pulse Mode is a specialized power delivery setting found primarily in devices equipped with advanced chipsets, such as the Vaporesso MODs / APVs lineup. In standard Variable Wattage (VW) mode, the device sends a continuous stream of power to the atomizer coil for the duration of the puff. While effective, this can sometimes lead to the coil getting progressively hotter, which may slightly alter the flavor profile toward the end of a long draw.
Pulse Mode functions differently. Instead of a flat delivery of power, it fires the coil every 0.02 seconds throughout the duration of your inhale. This rapid-fire pulsing is so fast that the human eye cannot see it and the user cannot feel individual "jolts." However, the atomizer responds by maintaining a much more stable temperature. This high-frequency pulsing ensures that the heat remains consistent from the moment you press the fire button until you release it.
The Role of the AXON Chip
The AXON chip is the brain behind many of the most popular devices at Vapor Authority. It is designed to handle complex calculations in microseconds. When you activate Pulse Mode, the chip manages the output to ensure the coil does not overheat or underperform. This level of control is what separates modern "smart" vape pens and box mods from the basic regulated devices of the past.
Defining Key Terms
To understand how Pulse Mode fits into your setup, it helps to define some common industry terms:
- Atomizer: The component of the device that houses the coil and wick, responsible for turning e-liquid into vapor.
- Coil: The heating element, typically made of wire or mesh, that vaporizes the e-juice.
- Firing Interval: The speed at which a device can activate the heating element after the button is pressed.
- Variable Wattage (VW): A setting that allows the user to manually adjust the power output of their device.
Benefits of the Pulse Vaping Experience
The primary reason adult vapers seek out Pulse Mode is the consistency it provides. Because the coil is not subjected to a single, uninterrupted flow of electricity, the temperature remains within an ideal range for vaporizing e-liquid.
- Consistent Flavor Delivery: Pulse Mode keeps temperatures stable so delicate flavor notes don't become muted or "cooked." The first second of your puff tastes exactly like the last.
- Enhanced Vapor Production: By pulsing at a high frequency, the device maximizes coil efficiency, often producing denser clouds without needing higher wattage settings.
- Improved Coil Longevity: Regulating temperature reduces the risk of "dry hits" or singing the cotton wick, helping to extend the life of your atomizer heads.
Quick Summary
- Rapid Power Delivery: Uses the AXON chip to fire in 0.02-second intervals for ultimate precision.
- Consistent Experience: Stabilizes flavor and vapor production from the start to the end of each inhale.
- Hardware Protection: Helps extend coil life by preventing the heating element from exceeding its thermal limit.
- Essential Care: Maximum performance requires high-quality batteries and properly primed coils.
Top Devices Featuring Pulse Technology
If you are looking for a device that offers this specific technology, you will find several high-quality options within the Vaporesso Starter Kits lineup. Every device we carry at Vapor Authority is 100% authentic and sourced directly from the manufacturer or authorized distributors.
| Device Series / Model | Battery Format | Wattage | Key Features | Best Fit |
|---|---|---|---|---|
| Vaporesso Gen 200 | Dual 18650 | 220W | Lightweight build, AXON chip | Experienced vapers seeking max battery life |
| Vaporesso Gen 80 S | Single 18650 | 80W | Compact, Pulse Mode support | Vapers wanting portability without losing tech |
| Vaporesso Target 100 | 21700 or 18650 | 100W | Rugged, water-resistant materials | Outdoor use and high-durability needs |
| Vaporesso Luxe 2 | Dual Battery | 220W | Large color screen, sleek aesthetics | Users prioritizing high-end design |
| Vaporesso Luxe QS | Integrated Pod | Smart Modes | Stylish, compact pod system | High-end technical experience in a portable size |
The Gen series, including the Vaporesso Gen 200 220W Box Mod and Vaporesso Gen 80 S 80W Box Mod, remains a favorite for sub-ohm vaping. For those needing durability, the Vaporesso Target 100 Starter Kit uses rugged materials. If aesthetics are the priority, the Vaporesso Luxe 2 220W Box Mod and the Vaporesso LUXE QS Pod System Starter Kit deliver high performance in a sophisticated package.
Technical Insights for Experienced Vapers
For those who have been vaping for years, the appeal of Pulse Mode often lies in the technical nuances of power delivery. Traditional PWM (Pulse Width Modulation) has been used in vaping for a long time, but the 0.02s interval of the AXON chip is a significant refinement.
Ohm’s Law and Power Stability
Experienced users know that as a battery drains, its voltage can drop, which sometimes affects the consistency of the vape. The Pulse Mode algorithm compensates for this by adjusting the duty cycle of the pulses. This ensures that even as your battery levels decrease, the "perceived" power at the coil remains stable. This creates a much flatter discharge curve in terms of user experience, preventing the "weak hits" that often occur when a battery is below 30% charge.
Sub-Ohm vs. MTL Application
While Pulse Mode is most often associated with sub-ohm tanks and high-wattage vaping, it can also benefit Mouth-to-Lung (MTL) vapers. In MTL setups, precision is key because the airflow is lower. Pulse Mode helps prevent the small, delicate coils used in MTL tanks from overheating during long draws, which preserves the integrity of high-nicotine e-liquids.
Pairing the Right E-Liquid
To get the most out of a pulse-capable device, you must pair it with high-quality Vape Crusaders E-Juice. At Vapor Authority, we only carry US-made e-liquids manufactured with food-grade and pharmaceutical-grade ingredients.
PG/VG Ratios
- High VG (70% or higher): Best for sub-ohm devices using Pulse Mode. The thicker consistency thrives under the consistent heat management of the AXON chip.
- 50/50 Ratios: Typically used for MTL vaping or pod systems, providing a stronger throat hit for smaller coils.
Proper Storage
Regardless of the flavor profile, keep your e-liquids in a cool, dark place away from direct sunlight to prevent nicotine oxidation. Always ensure your bottles are stored out of reach of children and pets.
Shipping and Availability
We ship all orders directly from our San Diego warehouse. While we strive for the fastest delivery, please note that all shipments are subject to state regulations, especially for customers in California and other states with specific restrictions.
Battery Safety for Advanced Devices
When using devices like the Gen 200 or Target 100, battery safety is a critical responsibility for the user. These devices use external lithium-ion batteries which require careful handling.
Important Safety Rules:
- Do not use batteries with any nicks, tears, or exposed metal on the protective wrap.
- Never carry loose batteries in your pocket or bag; always use a plastic protective case.
- Marry your batteries in dual-battery mods—always use, charge, and discharge them as an identical pair.
Inspecting Your Batteries
Always inspect the protective "wrap" on your batteries. If you see any damage, Do not use the battery, as it can lead to a short circuit. You can easily find replacement wraps or MOD batteries for your setup.
Proper Charging and Storage
We highly recommend using an Efest Slim K2 Intelligent charger rather than charging through the device's USB port. External chargers are more efficient and provide better long-term health. Additionally, Never carry loose batteries in your pocket or bag. Always use a plastic battery case to prevent the terminals from coming into contact with metal objects like keys or coins.
Matching Pairs
If you are using a dual-battery mod, you must "marry" your batteries. This means using two batteries of the same brand, model, and age. This ensures they drain at the same rate, which is vital for the safety of the device’s internal circuitry.
Maintaining Your Pulse-Enabled Device
Because Pulse Mode relies on precise communication between the chip and the coil, keeping the connections clean is vital.
Cleaning the 510 Connector
Use a cotton swab dampened with a tiny amount of isopropyl alcohol to wipe the threads and the center pin of the 510 connector. This ensures a solid electrical connection, allowing Pulse Mode to function accurately.
Coil Priming
When installing new Vaporesso GTi Mesh Replacement Coils, always prime them by dripping e-liquid directly onto the exposed cotton. Once filled, let the tank sit for 5 to 10 minutes to ensure full saturation. Firing on dry cotton can cause immediate damage, even with rapid pulsing.
Why Choose Vapor Authority?
Since 2013, we have dedicated ourselves to providing the vaping community with a reliable source for authentic hardware and premium e-liquids. Our team in San Diego personally tests the products we carry to ensure they meet our standards for quality and performance. We believe that adult vapers deserve clear, honest information and high-quality gear without the risk of counterfeits.
When you shop with us, you are supported by an award-winning customer service team. We offer a 60-day warranty on manufacturer defects for hardware, giving you peace of mind with your purchase. Whether you are looking for the latest Vaporesso mod or a classic US-made e-juice, we are here to help you find the perfect fit for your needs.
Conclusion
Pulse Mode is more than just a marketing slogan; it is a functional advancement in how vape devices manage power. By delivering energy in rapid micro-pulses, it provides a level of consistency that standard variable wattage modes often struggle to match. This results in better flavor, more reliable vapor production, and a smoother overall experience for adult vapers.
- Consistency: Enjoy a stable temperature throughout the entire duration of your puff.
- Flavor: Protect delicate flavor notes by preventing coil overheating.
- Technology: Leverage the power of the AXON chip for a smarter vaping experience.
- Safety: Always prioritize battery health and proper maintenance to keep your device running safely.
If you are ready to experience the difference that Pulse technology can make, we invite you to explore our selection. You can browse our full range of Vaporesso MODs / APVs and advanced mods and starter kits to find the device that best fits your lifestyle.
Shop Vaporesso MODs / APVs at Vapor Authority
FAQ
What does Pulse Mode actually do?
Pulse Mode is a setting that fires the battery in rapid 0.02-second intervals during a puff. Instead of one continuous flow of power, it pulses the electricity to maintain a more consistent temperature on the coil. This prevents the vapor from getting too hot toward the end of a long inhale and helps keep the flavor profile stable.
Does using Pulse Mode drain my battery faster?
While Pulse Mode involves more complex calculations from the device's chipset, the impact on battery life is generally negligible for the average user. Because the mode optimizes the efficiency of the coil's heating, many vapers find they can use slightly lower wattages to achieve the same satisfaction, which can actually help conserve battery power over time.
Can I use any tank with a Pulse Mode mod?
Yes, you can use any standard tank with a 510 connection on a mod that features Pulse Mode. The technology works by controlling the power output from the battery, so it is compatible with various coils and tanks. However, you will notice the most significant benefits when using sub-ohm tanks or high-performance mesh coils.
Is Pulse Mode better than standard Variable Wattage?
"Better" is often subjective, but many vapers prefer Pulse Mode because it removes the "drop-off" in flavor and vapor that can happen with a flat power curve. If you find that your hits feel inconsistent or get too hot during long draws, Pulse Mode is a highly effective solution that provides a more refined experience than standard Variable Wattage.
